Saturday, February 9, 2013

Shaping the Sides

After both sides have been attached to the front panel, they must be cut down to the proper width and shaped to accept the back panel, which is not perfectly flat.  The head and tail blocks set the side widths and each end.  And instead of sloping straight from one to the other, the back panel will have a curve to it.  Here's what the sides look like after I shaved them down with a planer.





2 comments:

  1. What happened next?! Dont leave us hanging!

    ReplyDelete
  2. I've been busy and have not made any more progress. Hopefully I'll get back on it in a week or two. Thanks.

    ReplyDelete